EAA-Baikal Remington Spartan Early Hastings Choke Tube I
12Ga Choke Tubes
Accu-Comp and Fast-Port Choke Tubes
12 Gauge Models
$60.00ea (Accu-Comp Shown)
This choke tube design has been in the works since 2001, and yields results far superior to other choke tubes.
Our new design uses a longer extension, and new taper profile to minimize errant shot dispersion, and provide denser,
more uniform patterns.
Patterns you can count on.
It's like Rocket Fuel for your shotgun shooting fun!
The choke tube extends 2 & 3/8" beyond your barrel, yet remains unobtrusive to your sighting lines.
Our Accu-Comp design chokes are designed with 36 gas ports to provide an accuracy enhancing muzzlebrake / compensator action.
Our Fast-Port design is equipped with 6 Fast acting slots to quickly distribute turbulence-causing gases, and provide a
straight-rifling effect, yielding a superior accuracy enhancement.
Some of our customers have said:
"I want to thank you from the bottom of my heart for the new choke tube that I ordered from you. The first night that I tried it
out I shot a perfect score of 25 out of 25 at trap. All my shooting was from the 27yd. line. It was a big improvement for me,
I had been struggling with 24's 23's and 22's, but no 25's until I installed your new tube."
"If you have anyone that is undecided about your product have them talk to me you won't be able to keep up with orders.
Thanks again. " -Mike G
"Tube is working wonderfully. I use it for shooting Trap games. We play Annies, and backers etc. from the 40 yard line here in
Ogden Utah. Although I haven't patterned the tube yet, I assume it is working when I can explode targets at 110 yards! Any way
great product, glad that I gave you guys a try. Thanks!" -Mac D
"Thanks for shipping the card shooter choke out so fast!"
"Won 5 out of 10 tries at the local shoot tonight shooting a 4 1/2" x 4 1/2" target without a chance to pattern the choke with
the same shells used at the shoot."
"I'm shooting a Rem 1187 with a 26" vent rib with your choke and Winchester AA trap loads #9 - 2 3/4 drams 1 1/8 oz of shot at
33 steps. Thanks so much!" -Winn H
Our customers are welcome to specify either style of porting, and virtually any choke size, from a 0.638" super-tight cardshooter
choke, out to a Cyl + 0.005" spreader-choke for fast opening patterns. All our choke tubes are available in bright, or blued, finish,
at your discretion.
In either porting style our choke-bore geometry is setup such that the wad is slowed as it exits through the tube, providing
separation from the shot column, promoting tighter shot dispersion patterns, by eliminating the wad influence on the pattern.
The choke has a long parallel section to stabilize the shot column during constriction, and to help separate the wad from the
shot column. All choke tubes are produced with a smooth internal taper, and smooth parallel section.
Each choke tube is custom made to order, to your exact specifications. These items are NOT available "off the shelf", and can
take up to 2 weeks to produce, depending on the shops' workload when your order is recieved. Please be patient, but feel free
to call, and or email, anytime.
Our choke tubes are custom pieces, each made to order, and hand finished. We combine the best of modern CNC quality, and accuracy,
and the craftsmanship of hand-finished pieces. Shop around, and then compare. There is no better deal on the market.
These choke tubes are CNC machined from very high quality, heat treated, cryogenically treated billet alloy steel (barrel grade).
These choke tubes will handle all types of shot, including steel shot, and HeviShot.
Each, and every choke tube we manufacture is Cryogenically Treated. Cryogenically treating steel relieves stress in the
material through deep cryogenic tempering. Stresses cause steel to bend or warp as it heats from repeated firing -- warping
causes walking, stringing, or wandering in the shot group. Deep cryogenic tempering process relieves internal stress in the
steel so the choke tube will no longer bend or warp. In addition, your choke tube will be easier to clean and give you increased
performance, increased accuracy, and extended choke tube life.
Deep cryogenic tempering is a one-time, computer-controlled process where metal is cooled slowly to deep cryogenic temperatures
(-300ø F), and slowly returned to room temperature. The metal is triple-tempered as the final step in the process. This dry
process permanently refines the grain structure of the steel at the atomic level, producing a homogeneously stabilized material.
The denser, smoother surface reduces friction, heat, and wear.
The result is better, more consistent coverage and placement of shotgun patterns. Your choke tube will last longer, be stronger,
shoot better, and be easier to clean!
Back To Top
Rifled Choke Tubes 12Ga
This choke tube is rifled for maximum accuracy. The choke extends about 1 & 3/16" beyond the barrel.
Non-ported only, flat black finish. Comes with choke wrench.